VEGA Mounting bosses and adapters User Manual
Page 35
Advertising
8
1
5
3
7
2
6
4
Fig. 57: Segmental welding
After welding a segment, weld immediately the segment that lies
exactly opposite. Interrupt the welding process after welding two
segments until the weld joint cools or carefully cool the weld joint
yourself before you start welding again.
The pressure loading capacity depends on the quality of the welding
as well as the material of the welded socket. With threaded sockets,
the thread length must be used completely bearing.
Pressure bearing
Mounting bosses and adapters
35
6 Welding instructions
32036
-
EN
-110223
Advertising