VEGA VEGAFLEX 63 4 … 20 mA_HART four-wire - Manual (Page 13)

D epending on the tube diameter or tube length, one or several spacers
can be mounted. With cable probes, the cable can also be strained to
avoid contact with the tube.
K
eep in mind that buildup can form on the spacers. Strong buildup can
influence the measurement.
M icrowaves can penetrate plastics. For process technical reasons,
plastic standpipes are problematic. If durability is no problem, then we
recommend the use of metal standpipes.
1
Fig. 5: Position of the spacer
1 Spacer
Note:
M
easurement in a standpipe is not recommended for very adhesive
products.
M ake sure that the probe is not subjected to strong lateral forces.
M ount VEGAFLEX 63 at a position in the vessel where no
disturbances, e.g. from filling openings, agitators, etc., can occur.
Inflowing medium
VEGAFLEX 63 • 4 … 20 mA/HART four-wire 13
4 M ounting
31842
-
EN
-100426