Scarlett SL-1501 - Manual (Page 4)

IM010
www.scarlett-europe.com SL-1501
4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
• Please read these operating instructions carefully
before connecting your kettle to the power supply
in order to avoid damage due to incorrect use.
• Before first switching on check that the voltage
indicated on the rating label corresponds to the
mains voltage in your house.
• Incorrect operation and improper handling can lead
to malfunction of the appliance and injuries to the
user.
• For home use only. Do not use for industrial
purposes.
• Always unplug the appliance from the power supply
when not in use.
• Keep the base unit away from water and protect
from splashes.
• Do not immerse the unit, cord or plug in water or
other liquids. If it has happened, remove the plug
from the wall socket immediately, an expert should
check the unit before using it again.
• Do not operate the appliance if the cord or the plug
is damaged or if the appliance has been otherwise
damaged. In such cases take the appliance to a
qualified specialist for check up and/or repair if
necessary.
• If the power cord is damaged it should be replaced
by the manufacturer or authorized servicing center
or qualified professional for safety reasons.
• Ensure that the cord does not hang over sharp
edges and keep it away from hot surfaces.
• To disconnect appliance from the power supply pull
it out by the plug only, not by the cord.
• Place the appliance on a dry stable non-hot
surface, away from hot objects (e.g. hotplates); do
not place under curtains and shelves.
• You should never leave the appliance not
supervised during use.
• The oven should not be operated by persons
(including children) with depressed physical,
sensory or mental abilities or by persons who do
not have the corresponding knowledge and
experience if these persons are not supervised or
instructed about the use of the oven by another
person responsible for their safety.
• Children should be supervised and should not be
permitted to play with the oven.
• Use the kettle only with the base unit supplied, and
do not use the base unit for any other purposes.
• Never take the kettle off from its base unit while in
operation. Switch the appliance off first.
• Close the lid properly before switching on.
Otherwise, the appliance will not switch off
automatically and the hot water may overflow.
• The kettle is for heating water only, not for any
other purposes and liquids.
• If the product has been exposed to temperatures
below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it
on.
• The manufacturer reserves the right to introduce
minor changes into the product design without prior
notice, unless such changes influence significantly
the product safety, performance, and functions.
BEFORE USING FOR THE FIRST TIME
• Remove all packing materials and sticker from the
kettle.
• Fill the kettle with cool water up to the maximum
level mark and boil it. Empty the kettle. Repeat this
operation. The appliance is ready for use.
INSTRUCTION FOR USE
FILLING
• In order to fill the kettle with water take the kettle off
its base, open the lid by pressing the lid opening
button, pour in the water observing the water level
scale.
• In order to avoid overheating the kettle do not pour
in more than 0.5 liters of water (below “MIN” mark).
Do not pour in more than 1.7 liters of water (above
“MAX” mark), otherwise the water may overflow
through the nozzle when it starts boiling.
• Close the lid tightly.
TURN ON
• Put the filled kettle onto the base; it is possible to
put the kettle the way it is convenient for you since
the base allows for 360° rotation of the kettle.
• Plug the power cord into the socket.
• Press the start button .
• All the buttons will go blinking red.
• Press the button with the required temperature
(60°, 70°, 80°, 90° or 100°).
• Recommended temperature for making:
• 60°- white tea
• 70°- red tea
• 80° - green tea
• 90° - oolong tea
• 100°- black tea
• The chosen button will be highlighted on the base.
• The button will stay highlighted until the water
reaches the set temperature, then the indicator will
go out and the kettle will automatically switch off.
• Button lights on the base will turn on. The lights will
stay on for 5 minutes, and then the lights will turn
off.
• The lights show that the device is ready to operate.
KEEP WARM
• This regime is used to maintain the water of
needed temperature for 30 minutes.
• Press one of the buttons for temperature heating
and select the needed temperature (60°, 70°, 80°or
90°) (the button light will start blinking).
• Press the heating button (the heating button
light will turn on), and the kettle will start heating he
water.
TURN OFF
• You may turn the kettle off by taking it off the base
or by pressing the button of the selected regime
again.
• ATTENTION: Your kettle is equipped with
overheating protection system. If there is too little
or no water in the kettle, it will turn off
automatically. If this happens you have to wait for
at least 10 minutes until the kettle cools off. Then
you may fill the kettle with water again.
SUBSEQUENT TURN-ON
• Wait 15-30 seconds after the kettle turns off; then
you may turn it on again to boil the water.
CARE AND CLEANING
• Remove the plug from the socket and let the
appliance cool down completely.
• Open the lid and pour out the water.