VEGA VEGAVIB - External housing - Manual (Page 8)

A
B
1
2
3
4
Fig. 3: Components of the external housing for plics ® devices
A Sensor housing
B Instrument housing
1 Screwed cover
2 Base element
3 Housing socket
4 Wall mounting plate
3 .2 Principle of operation
The external housing is suitable for the following plics sensors:
l
VEGAVIB series 60
3 .3 Storage and transport
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
l
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
l
Relative humidity 20 … 85 %
Application area
Packaging
Storage and transport
temperature
8 VEGAVIB - External housing
3 Product description
31086
-EN
-081119