VEGA VEGAVIB 65 - NAMUR - Manual (Page 13)

20˚
Fig. 3: Horizontal installation
a Protective sheet
b Concave protective sheet for abrasive solids
If VEGAVIB 65 is mounted in the filling stream, unwanted
switching signals may be generated. Mount VEGAVIB 65 at a
location in the vessel where no disturbing influence from e.g.
filling openings, agitators etc. can occur.
To minimise flow resistance caused by the tuning fork,
VEGAVIB 65 should be mounted in such a way that the
surfaces of the fork are parallel to the product movement.
1
2
Fig. 4: Orientation of the tuning fork in case of flow
1 Marking with screwed version
2 Direction of flow
Inflowing material
Flow
VEGAVIB 65 - with NAMUR output 13
Mounting
31218
-EN
-060508