VEGA VEGAPULS 68 Antenna covers - Manual (Page 10)

10
3 Mounting
Antenna covers • for VEGAPULS 68
33543-EN-131107
5 4 3 2 1
Fig. 8: of PTFE textile
1 Polarisation marking
2 Form seal
3 Tension band
4 Antenna cover
5 Seam of the antenna cover 90° to the polarisation marking
3. Pull the antenna cover over the antenna horn
4. Align the seam of the antenna cover 90° to the polarisation mark-
ing
5. Fold the antenna cover around the silicone ring
6. Open the tension band and pull it over the antenna cover on the
silicone ring
7. Tighten the screw of the tension band until the antenna cover and
the silicone ring fit together tightly
Proceed as follows:
1. Pull the antenna cover over the antenna horn
2. Align the seam of the antenna cover 90° to the polarisation mark-
ing
1
3
4
2
Fig. 9: of PTFE textile
1 Polarisation marking
2 Flange collar
3 Antenna cover
4 Seam of the antenna cover 90° to polarisation marking
Antenna cover of PTFE
textile for flange