VEGA VEGAPULS 67 Variable flange seal - Manual (Page 4)

2 Product description
2.1 Configuration
The scope of delivery encompasses:
l
Variable flange seal
l Documentation
-
this operating instructions manual
The two parts of the variable flange seal are joined together with a
form-locking tongue and groove joint.
2.2 Principle of operation
The adjustable flange seal is used to direct the sensor antenna to the
bulk solids surface and hence optimise the measurement. For this
purpose, the two wedge-shaped parts of the seal can be turned
without the use of any tools up to an angle of 0 … 8°.
The seal is mounted between sensor flange and vessel flange. After
installation the two parts of the seal fit together absolutely leak-proof.
Depending on the size, the seal is suitable for a VEGAPULS 67 radar
sensor with the following process fittings:
l
Combi compression flange DN 80/ANSI 3"/JIS DN 80 10K
l
Adapter flange DN 100, ANSI 4", JIS DN 100 10K
l
Adapter flange DN 150, ANSI 6", JIS DN 150 10K
Scope of delivery
Components
Functional principle
Area of application
4 Variable flange seal • for VEGAPULS 67
2 Product description
33797
-EN
-081029