VEGA VEGAFLEX 67 (-20…+250°C) Foundation Fieldbus - Manual (Page 47)

L
0
10 mm (0.394 ")
-10 mm (-0.394 ")
0,1 m (3.937 " ) 0,15 m
(5.906 ")
1 1
Fig. 24: Deviation VEGAFLEX 67 in coax version
1 Dead zone - no measurement possible in this area
L Probe length
Influence of the ambient temperature to the sensor electronics
Temperature drift 0.03 %/10 K relating to the max. measuring range
or max. 0.3 %
Temperature drift - Digital output 3 mm/10 K relating to the max. measuring range or
max. 10 mm
Ambient conditions
Ambient, storage and transport temperature -40 … +80 °C (-40 … +176 °F)
Process conditions
Process pressure -1 … +100 bar/-100 … +10000 kPa (-
-14.5 … +1450 psig), depending on the process
fitting
Process temperature (thread or flange tem-
perature) -20 … +250 °C (-4 … +482 °F)
The measurement error from the process condi-
tions is in the specified pressure and temperature
range of below 1 %.
VEGAFLEX 67 • Foundation Fieldbus 47
10 Supplement
32310
-
EN
-120329