Hyundai H-MW1320 - Manual (Page 10)

10
STAGE 2:
1) Touch
key.
2) Touch key 9 times to select power level, display will indicate P20
3) Touch number keys “9“, “0”,“0”in turn to set cooking time, display will indicate “9:00”
4) Touch
key to start cooking
Defrost by time.
1) On standby state or clock state, touch
. key.
2) Enter desired defrosting time by touching correct number keys. Digital timer sets minutes and seconds from left to right so a single digit can be set (5 for 5
seconds) or up to 4 digits (2405 for 24 minutes 5 seconds).
3) Touch
key.
Note: After time has elapsed four beeps sound and END appears in display. Touch RESET key or open the door to clear END before starting another
cooking function.
After setting
. , oven can be programmed to automatically switch to one or two-Stage cooking.
For speed defrost and one stage cooking, follow steps above. Before touching key, touch key, and enter time and power level.
Then touch key.
For speed defrost and two stage cooking, follow steps above. Before touching key, enter two-stage cooking programs.
6. Setting “defrost by weight”
1) On standby state or clock state, Touch
. key.
2) Enter weight.
3) Touch
key.
Note: weight must be in kg, you can set the Food weight from 0.1, 0.15. 0.2……2.9, 2.95, 3.0 Kg. Turn food over when oven beep twice. Close the door and
touch
key to resume defrosting. After total defrosting time, 4 beeps sound and END appears in display. Touch or open oven door
to clear END before starting another cooking function.
7. Setting “cook by weight”
1) On standby state or clock state, Touch the
key.
2) Enter the one-digit code by touching the correct number key.
3) Enter weight.
4) Touch
key.
Note:·Your microwave oven makes cooking easy. You set the type and weight of food, and the oven automatically sets the cooking time and power level.
Meat must be defrosted and at refrigerated temperature. Weight must be in Kg. Turn meat over when beep twice. Touch
to resume cooking.
After total cooking time, 4 beeps sound and END appears in display. Touch or open oven door to clear END before starting another cooking
function. Let meat stand few minutes before carving.