VEGA VEGAMIP T61 Emitting unit - Manual (Page 9)

Typical applications are overfill and dry run protection. With an
operating distance of 100 m, VEGAMIP 61 can be used, for example,
in bulk solids silos with large diameters. Thanks to its simple and
rugged measuring system, VEGAMIP 61 is virtually unaffected by the
process and the chemical and physical properties of the medium.
VEGAMIP 61 can also be used for detection of vehicles and ships or
for material recognition on conveyor belts.
It works even under extremely difficult conditions: different grain sizes,
contamination, extreme filling noise, high temperatures, strong dust
generation and abrasive products are all no problem for the
instrument.
The VEGAMIP 61 consists of the following components.
3 3
5
4
5
2 1
Fig. 1: VEGAMIP 61 with plastic housing
1 Emitting unit VEGAMIP T61
2 Receiving unit VEGAMIP R61 with control electronics
3 Housing cover
4 Housing with control electronics
5 Process fitting
VEGAMIP T 61 • Emitting unit 9
3 Product description
36998
-
EN
-120228