3 product description – VEGA VEGABAR 67 4 … 20 mA_HART User Manual
Page 7
7
3 Product description
VEGABAR 67 • 4 ... 20 mA/HART
36742-EN-130321
3 Product description
3.1 Configuration
The scope of delivery encompasses:
•
VEGABAR 67 pressure transmitter with suspension cable
•
Straining clamp (optionally available with screwed fitting)
•
External electronics
•
or VEGABAR 67 pressure transmitter with connection tube
•
Documentation
– this operating instructions manual
– Test certificate for pressure transmitters
– Safety Manual 31637 "VEGABAR series 50 and 60 -
4 … 20 mA/HART" (optional)
– Operating instructions manual 27835 "Display and adjustment
module PLICSCOM" (optional)
– Supplementary instructions manual 31708 "Heating for display
and adjustment module" (optional)
– Supplementary instructions manual "Plug connector for con-
tinuously measuring sensors" (optional)
– Ex-specific "Safety instructions" (with Ex versions)
– if necessary, further certificates
The nameplate contains the most important data for identification and
use of the instrument:
•
Instrument type
•
Article number instrument
•
Technical data: Measuring range, process pressure, process tem-
perature, signal output, voltage supply, protection, protection class
•
Order number
•
Article numbers, documentation
•
Serial number
With the serial number, you can access the delivery data of the instru-
ment via www.vega.com, "VEGA Tools" and "serial number search".
In addition to the type label outside, you can also find the serial num-
ber on the inside of the instrument.
The VEGABAR 67 consists of the components:
•
Transmitter
•
Suspension cable or connection tube (optionally available with
lock fitting)
•
External housing with electronics, optionally available with plug
connector
The components are available in different versions.
Scope of delivery
Type plate
Constituent parts