VEGA VEGABAR 52 Profibus PA - climate compensated - Manual (Page 49)

49
10 Supplement
VEGABAR 52 • Profibus PA - climate compensated
36788-EN-130321
Adjustment range of the min./max. adjustment relating to the nominal measuring range:
Ʋ Percentage value -10 … 110 %
Ʋ Pressure value -20 … 120 %
Adjustment range of the zero/span adjustment relating to the nominal measuring range:
Ʋ zero -20 … +95 %
Ʋ Span -120 … +120 % 10)
Ʋ Difference between zero and span max. 120 % of the nominal range
Recommended max. turn down 5 : 1 (no limitation)
Nominal measuring ranges and overload capability in bar/kPa
The specifications are only an overview and refer to the measuring cell. Limitations due to the ma-
terial and version of the process fitting are possible. The specifications on the nameplate apply.
Nominal range Overload capacity, max.
pressure
Overload capacity, min. pres-
sure
Gauge pressure
0 … +0.2 bar/0 … +20 kPa
+35 bar/+3500 kPa -1 bar/-100 kPa
0 … +0.4 bar/0 … +40 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +1 bar/0 … +100 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +2.5 bar/0 … +250 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +5 bar/0 … +500 kPa +65 bar/+6500 kPa -1 bar/-100 kPa
0 … +10 bar/0 … +1000 kPa +90 bar/+9000 kPa -1 bar/-100 kPa
0 … +25 bar/0 … +2500 kPa +130 bar/+13000 kPa -1 bar/-100 kPa
0 … +60 bar/0 … +6000 kPa +200 bar/+20000 kPa -1 bar/-100 kPa
-1 … 0 bar/-100 … 0 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
-1 … +1.5 bar/-100 … +150 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
-1 … +5 bar/-100 … +500 kPa +65 bar/+6500 kPa -1 bar/-100 kPa
-1 … +10 bar/-100 … +1000 kPa +90 bar/+9000 kPa -1 bar/-100 kPa
-1 … +25 bar/-100 … +2500 kPa +130 bar/+13000 kPa -1 bar/-100 kPa
-1 … +60 bar/-100 … +6000 kPa +200 bar/+20000 kPa -1 bar/-100 kPa
-0.1 … +0.1 bar/-10 … +10 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
-0.2 … +0.2 bar/-20 … +20 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
-0.5 … +0.5 bar/-50 … +50 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
Nominal measuring ranges and overload capability in psig
The specifications are only an overview and refer to the measuring cell. Limitations due to the ma-
terial and version of the process fitting are possible. The specifications on the nameplate apply.
Nominal range Overload capacity, max.
pressure
Overload capacity, min. pres-
sure
Gauge pressure
0 … +3 psig
+500 psig -15 psig
10) Values less than -1 bar cannot be set.