Sony DPP--SV77 User Manual

Page 75

Advertising
background image

75

GB

Printing from your computer

4

Click “Yes.”

The relevant files are removed from your computer’s hard disk.

Note on DPP-SV77 software installation for the customers using
Sony DPP-SV55 digital photo printer

When you have already installed the Sony DPP-SV55 printer driver or reader
software onto your computer with Windows 98/98SE/Me operating system,
your computer cannot detect the DPP-SV77 connected via USB port as new
hardware. Follow the procedures below to change the DPP-SV55 USB driver
into the DPP-SV77 USB driver. Then run “Setup.exe” contained in the CD-
ROM supplied with the DPP-SV77 to install the software.
Once you have changed the USB driver, you can connect and use the DPP-
SV55 as well as DPP-SV77. The DPP-SV55 is displayed as DPP-SV77 on your
computer, which is not problem.

1

Start Windows, turn on the printer and connect the printer
with the computer via USB port.

2

Click “Start” from the Windows taskbar, point to “Settings”
and then click “Control Panel.”

3

Double-click “System” to open the “System Properties”
window.

4

Open the “Device Manager” tab, select “Sony DPP-SV55 USB
Digital Photo Printer” under the “Universal serial bus
controller” and then click “Properties.”

5

Open the “Driver” tab and click “Update driver.”

6

Click “Next.”

7

Click “Display a list of all the drivers in a specific location, so
you can select the driver you want” and then click “Next.”

Continued

Advertising