VEGA WEB-VV VH - Manual (Page 7)

4 Operation
4 .1 Prerequisites
The following prerequisites must be fulfilled in order to use WEB-VV:
You receive this document with the order confirmation. Enter your
company data, including an appropriate contact person. A contact for
the user account of the supervisor is also required. Please send the
contact data to the fax number given in the form.
After sending in the contact data, you receive the license agreement.
This agreement includes the services, the duties and the liabilities of
both parties. The access data for the first login are also included.
A device network consists of a signal conditioning instrument
VEGAMET/VEGASCAN/PLICSRADIO with connected sensors and
the respective measurement loops. If signal conditioning instruments
are integrated via Ethernet interface into a company network with
internet access, the measured values can be transmitted directly via
http (Port 80) to the WEB-VV server. If the measured values should be
transmitted via modem (analogue/ISDN/GSM/GPRS), an appropriate
communication device is also required. In addition, the access data of
a provider are required in order for the signal conditioning instrument
to gain access to the Internet.
Set up the signal conditioning instrument with PACTware according to
the respective instructions manual as well as the online help available
in PACTware and start a test transmission of the measured values.
Fig. 1: Test transmission WEB-VV measured values
WEB-VV contact data
WEB-VV license agree-
ment
Setup device network
WEB-VV VH • Configuration, first steps 7
4 Operation
35069
-
EN
-081201