VEGA Supplementary electronics For 4 … 20 mA_HART and power pack - Manual (Page 8)

8
4 Mounting
Supplementary electronics • For 4 … 20 mA/HART and power pack
41033-EN-140108
7. Screw in the two holding screws and tighten them
8. Insert the charging socket and tighten the fixing screw
9. Close plug connector
10. Screw the housing cover back on
The accumulator exchange is finished.
As a rule, an exchange of the accumulator insert must be document-
ed internally when Ex applications are involved.