VEGA VEGABAR 86 Save sensor - Quick setup guide - Manual (Page 8)

8
4 Mounting
VEGABAR 86 • Slave sensor for electronic differential pressure
46334-EN-131125
4.3 Combination Master - Slave
In principle, any sensor combination within the VEGABAR 80 series is
allowed. The following requirements must be fulfilled:
•
Configuration, Master sensor suitable for electronic differential
pressure
•
Pressure type is identical for both sensors, i.e. relative pressure/
relative pressure or absolute pressure/absolute pressure
•
The master sensor must always measure the higher pressure
•
Measurement setup as shown in the following chapters