VEGA VEGAMET 514V Menu plan - Manual (Page 2)

2 VEGAMET 514V
Lang-
uage
Eng-
lish
Param.
TAG-
No. 1
In white letters
you see the
parameters which
can be modified
with the + or - key
and which can be saved with
the OK-key.
Bolt print / italic are
the sensor or
measured value
information which
cannot be
modified in this pos ition.
Light grey menu points
are only displayed if
necessary (dependent
on the adjustments in
other menus).
Relay
outp. 2
ESC
OK
With these keys you move in
the menu field
Reduced menu
For adjustment of the signal conditioning instruments VEGAMET 514 V two menus are
available:
the „Reduced menu“ and the „Extended menu“ (see following pages).
As factory setting „Reduced menu“ is activated.
The most important adjustment steps (e.g. adjustment, adjustment integration time,
simulation...) can be carried out in the „Reduced menu“.
When you want to move to the „Extended menu“ (e.g. to edit linearisation curves) proceed as
follows:
– Move with the OK-key and the arrow keys to the menu point „Menu mode reduced“.
– Push the + key twice.
– The display shows now „Menu mode extended“.
– Now push the OK-key to save the adjustment.