2 connecting – VEGA Supplementary electronics Overvoltage protection User Manual
Page 8
Advertising
8
4 Mount and connect
Supplementary electronics • Overvoltage protection
46670-EN-140108
4.2 Connecting
Note:
The connection is carried out according to chapter "Connecting to
voltage supply" of the operating instructions manual of the respective
sensor.
5
1
2
+
( )
(-)
6 7 8
Surge
Protection
Display
2
3
4
1
Fig. 3: Terminal compartment, double chamber housing
1 Voltage supply/Signal output
2 For display and adjustment module or interface adapter
3 Connection of the overvoltage protection to the ground terminal
1)
4 Ground terminal for connection of the cable screen or for low impedance
connection to the potential equalization cable
Connection compartment
- overvoltage arrester
1)
Advertising