Altronix HubWay 8CDS Data Sheet - Manual

HubWay8CDS Passive UTP Transceiver Hub w/Integral Camera Power trans-
mits UTP video, RS422/RS485 data and power over a single CAT-5 or higher
structured cable. Unit provides 8 camera channels in a space saving 1U EIA
19” rack mount chassis which may be wall or shelf mounted. Video transmis-
sion range is up to 750 ft. max. per channel. Units are compatible with AC and/
or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv
or HubWayDvi Video Balun/Combiners. An optional HubSat4D Passive
UTP Transceiver Hub with Integral Camera Power can be used as an acces-
sory module to transmit video from up to 4 cameras over a single CAT-5 or
higher structured cable back to the HubWay8CDS. In addition, the HubSat4D
provides power to these cameras locally to eliminate the possibility of voltage
drop associated with long cable runs.
HubWay8CDS - Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWay8CDS - 10262012
Overview
Specifications
Agency Approvals
Input:
• 115VAC 60Hz, 1.5 amp.
• Primary fuse (int ernal) is rated at 5 amp/250V.
Video:
• Eight (8) channels of video over twisted pair
up to a distance of 750 ft. (228.6m) per channel.
• Eight (8) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
• Individually selectable 24VAC or 28VAC isolated
power outputs with OFF position.
• Class 2 Rated power limited outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• Total system power consumption: 150 W.
• 57 BTU/Hr.
• System AC input VA requirement: 150VA.
Features:
• Eight (8) power LEDs.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
-
HubWayAv2 Slim-line - compatible with all
HubWay UTP Hubs for AC or DC fixed cameras
or PTZs.
-
HubWayDv - compatible with all HubWay
UTP Hubs for DC fixed cameras or PTZs.
-
HubWayDvi - built-in isolation. Compatible with
all HubWay UTP Hubs for DC fixed cameras
or PTZs.
Mechanical:
• Units can be rack, wall or shelf mounted.
• Modular 1U standard EIA 19” rack mount chassis.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Product weight (approx.): 10.4 lbs. (4.72 kg).
• Shipping weight (approx.): 11.7 lbs. (5.31 kg).
HubWay8CDS
UL Listed for Commercial CCTV Equipment
(UL 2044). CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.