Altronix T24130C Installation Instructions - Manual

T24130C - AC Power Supply
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIT24130C - Rev. 110101
I05B MEMBER
Overview:
T24130C AC Power Supply provides 24VAC with a total of 4 amp of continuous supply current.
Specifications:
• Input 120VAC 50/60 Hz, .95 amp.
• 24VAC/100VA (4 amp) output.
• Fused input protection.
• Green grounding lead.
Enclosure dimensions: 5.75"H x 7"W x 4.5"D
Installation Instructions:
1. Mount T24130C in desired location.
2. Connect the AC (120VAC 50/60 Hz) to the
black and white flying leads of the transformer (Fig. 1).
Note: It is important to measure output voltage before
connecting devices. This helps avoid potential damage.
3. Connect devices to terminal block on the inside back of the enclosure.
4. Upon completion of wiring, secure enclosure door with screws (supplied).
WARNING: This installation should be made by qualified service personnel and should
conform to all local codes and in accordance with the National Electrical Codes.
Fig. 1 Enclosure Dimensions:
5.75"H x 7"W x 4.5"D
0 0
0
2.75"
4.94"
4.5"
4.5"
.69" 1.6" 6.44" 7"
0
1.18"
4.5"
5.16"
TOP & BOTTOM
Green
Lead
(ground)
Black
In-line Fuse
Black Red
White