Altronix RAC24 Installation Instructions - Manual

RAC24 - Relay & Base Module
Specifications:
• UL Recognized.
• CSA Approved.
• 24VAC operation.
• Current draw: 45mA.
• 10 amp/220VAC or 28VAC DPDT contacts.
• DIN Rail mountable.
Dimensions: 2.7”L x 1.375”W x 2.375”H
Installation Instructions:
1. Mount RAC24 in desired location.
2. Plug-in relay into base.
3. Relay will activate upon applying
24VAC to the terminals marked
[7 & 8].
4. Use output contacts to make and
break load circuits.
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIRAC24 - Rev. 011812
A18L MEMBER
3 1 7 5
4 2 8 6
Coil
C
NC
NO
C
NC
NO
Coil