Altronix AL600ULB Data Sheet - Manual

0.17”
(4.32mm)
3.7”
(93.98mm)
4.26”
(108.2mm)
6.7”
(170.18mm)
7.0”
(177.8mm)
0.25”
(6.35mm)
Ø
0.156”
(3.96mm)
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Specifications
Agency Approvals
UL Recognized component for Access Control System Units (UL 294),
Standard for Safety for Fire Protective Signaling Systems (UL 1481).
AL600ULB
Board Dimensions (L x W x H) (approximate) :
4.3” (109.22mm) x 7.0” (177.8mm) x 2.3” (58.42mm)
AL600ULB is a UL Recognized power supply/charger which converts a
28VAC/200VA input into a single 12VDC or 24VDC non-power limited output.
AL600ULB
Power Supply/Charger
Rev. DSAL600ULB_11142012
Overview
Input:
• Input two (2) 28VAC/100VA, 1 amp transformers.
Output:
• 12VDC or 24VDC selectable output.
• 6 amp continuous supply current.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.7 amp.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• 36.85 or 73.70 BTU/Hr.
• System AC input VA requirement: 230VA.
Mechanical:
• Product weight (approx.): 1.17 lbs. (0.53 kg).
• Shipping weight (approx.): 1.25 lbs. (0.57 kg).