Altronix NetWay1E Data Sheet - Manual

Input:
• 115VAC 60Hz, 1.5 amp.
Data:
• One (1) PoE port provides power and passes data
over ethernet (CAT5) cable up to 100m (328 ft.).
• Data rate: 10/100/1000Base-T.
Output Power:
• IEEE 802.3af (15W) & IEEE 802.3at (25W)
compliant.
• Short circuit and overload protection.
• Supports LTPoE++™ 70W, 52.7W & 38.7W
PD compliant devices up to 100m (328’).
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Features:
• Port status LEDs.
• Manual PoE shutdown (Spring terminals).
• IEC 320 - 3-wire grounded line cord (detachable).
Electrical:
• Operating temperature:
85W -20º C to 49º C ambient.
55W -20º C to 55º C ambient.
• 32 BTU/Hr.
• System AC input VA requirement: 172.5VA.
Mechanical:
• Unit can be wall or shelf mounted.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 4” (101.6mm)
x 7.25” (184.15mm)
• Product weight (approx.): 2.2 lbs. (1.0 kg).
• Shipping weight (approx.): 3.2 lbs. (1.45 kg).
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Netway1E is an enhanced 10/100/1000Base-T PoE++ midspan power injector. It is fully
compliant and backwards compatible with PoE (15W) and PoE+ (25W) PoE devices. The
NetWay1E is also capable of sourcing up to 85W with devices incorporating LTPoE++™
70W, 52.7W & 38.7W requiring up to 70W of power at up to 100m (328’).
NetWay1E
Single Port PoE++ Injector for Standard &
Enhanced Power Network Infrastructure
Rev. DSNetWay1E_04262013
Overview
Specifications
Typical Application:
Structured
Cable from
Network Switch
12VAC to 24VAC or
5VDC to 24VDC input
for Remote Manual
PoE Shutdown
Structured
Cable to
IP Camera
--- +
PoE
Shutdown IN OUT
PoE
ON
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Agency Approvals
®
NetWay1E