Altronix VertiLine563 Data Sheet - Manual

VertiLine563
Rack Mount DC Power Supply
Rev. DSVertiLine563 - 07012013
Altronix Vertiline563 is a EIA 19” 1U rack mountable dual independent power sup-
ply with optional battery backup that provides 56VDC. It is intended primarily to be
used in conjunction with respective Altronix current and future products that requires
56VDC input such as: eBridge4PCRX, eBridge16PCRX & eBridge1PCRX multi-
port & single port IP/PoE over coax adapters. However, it can also be employed
wherever 56VDC level power sources are needed.
There are applications, which may require delivering power in a range of 48VDC to
57VDC over CAT5 cable for distances up to 100m. For these applications, transmis-
sion at the higher voltage is more efficient, as it reduces cable losses when compared
to the lower voltage.
Overview
Specifications
Agency Approvals
UL/CUL Listed for Information Technology Equipment (UL 60950-1).
VertiLine563
Input:
• Input 115VAC 60Hz, 4.9 amp.
Output:
• 56VDC @ 3 amp each output.
(When using battery backup output rating is 56V/2.7
amp for respective outputs).
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.*
*External batteries are optional.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.3 amp.
Features:
• Two (2) AC LED indicators.
• IEC 320 - 3-wire grounded line cord (detachable).
Features (cont’d):
• Unit can be rack or shelf mounted.
• 1U rack mount chassis for use in standard
EIA 19” rack.
Mechanical:
• Rack Dimensions (H x W x D approx.) :
1.625” x 19.125” x 8.5”
(41.275mm x 485.775mm x 215.90mm)
• Product weight (approx.): 7.0 lbs. (3.18 kg.).
• Shipping weight (approx.): 8.3 lbs. (3.76 kg.).
Accessories:
RE2 - Rack Mount Battery Enclosure:
• Fits up to four (4) 12VDC/7AH batteries.
• 2U rack mount chassis for use in standard
EIA 19” rack .
CE European Conformity