Altronix T24150 Installation Instructions User Manual
Altronix Accessories for electrical
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Made in U.S.A.
IIT24150 - Rev. 061710
F28J
T24150 - Open Frame Transformer
Overview:
T24150 transformer converts 115VAC 50/60Hz to 24VAC for powering low voltage devices.
Maximum power output is rated @ 5.4 amp.
Specification Chart:
Model #
Input (Primary)
Output (Secondary)
T24150
115VAC 50/60Hz (1.2 amp)
24VAC/130VA (5.4 amp)
Installation Instructions:
1. Mount transformer in desired location/enclosure (refer to Transformer Dimensions below).
2. Plug power cord into 115VAC 50/60 Hz receptacle.
3. Measure output voltage across the secondary leads which are connected to terminals 7 and 12 before
connecting devices. This helps avoid potential damage (open circuit voltage is approx. 26.1VAC @ 115VAC input)
(refer to Wiring Configuration below).
4. Connect 24VAC device(s) to the secondary leads which are connected to terminals 7 and 12
(refer to Wiring Configuration below).
WARNING: This installation should be made by qualified service personnel and should
conform to all local codes and in accordance with the National Electrical Codes.
Wiring Configuration:
Transformer Dimensions:
Model #
A
B
C
D
E
F
G
H
Approx. Ship Wt.
T24150
2.82”
3.387”
3.05”
1.5”
2.79”
2.3”
2.468”
3.013”
4.5 lbs.
PRIMARY - 115VAC 50/60Hz
SECONDARY - 24VAC
6
5
4
3
2
1
7
8
9
10
11
12
F
A
B
D
C
E
H
G