Altronix eBridge1PCT Data Sheet - Manual

The eBridge1PCT - IP over Coax transceiver is designed for use with eBridge-
1PCR, eBridge1PCRX, eBridge4PCRX and eBridge16PCRX receivers to enable fast
10/100Base-T Ethernet digital communication over coax cable. The eBridge1PCT will
not deliver power to non compliant devices, thus avoiding damage to improperly con-
nected non-PoE cameras/devices. This plug and play unit facilitates system upgrades
from analog to IP cameras/devices utilizing existing legacy Coax and eliminating
the costs and labor associated with installing new network cabling. In addition, data
transmission is extended to 2,000’ (over five times the 100m/328’ Ethernet maximum
length), eliminating the need for repeaters.
eBridge1PCT - IP over Coax Transceiver
Rev. DSeBridge1PCT_08012013
Specifications
Overview
* sloc is a registered trademark of Intersil Corporation.
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Compliant:
• Incorporates *sloc
TM
(Security Link over Coax) technology.
Input:
• Powered by eBridge receiver.
Power Consumption (under maximum load):
• Powered by eBridge receiver.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m (328 ft.).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) Delivered to
camera by eBridge1PCT. Power provided by
eBridge receiver to eBridge1PCT by PoE protocol.
• Throughput is rated to pass 25mbps of data at
distances up to 2,000 ft. With proper headend
equipment, this supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 1,500 ft. for power delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Blue LED - Coax link connection (SLOC).
• Green LED - PoE from eBridge1PCR.
Environmental:
• Operating Temperature:
--- 4ºF to 140ºF (--- 20ºC to +60ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing.
Electrical:
• BTU/Hr.:
- 24VDC: 12.28 BTU/Hr.
- 24VAC: 11.1 BTU/Hr.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment over 610m (2000 ft.).
• Upgrade deployed CCTV Coax to a digital network
in Retail, Casinos, Airports, Schools, Hospitals, etc.
Mechanical:
• Dimensions (W x L x H approx.):
2.5” x 4.375” x 1” (63.5mm x 111.125mm x 25.4mm).
• Product Weight: 0.21 lbs (0.09 kg).
Shipping Weight: 1 lbs (0.45 kg).
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
C-Tick Approved - Z1409
eBridge1PCT