Altronix StrikeIt1 Data Sheet - Manual

StrikeIt1
Panic Device Power Controller
Rev. DSStrikeIt1 - 09162013
StrikeIt dual channel Panic Device Power Controller is designed to provide 24VDC
power for a maximum of two electrified panic devices with very high inrush re-
quirements. Each channel has an adjustable relock delay input that will control a
pair of doors simultaneously or independent control of two single doors. Unit has
two sets of relays per channel which can be configured to trigger external relays,
automatic door openers, ADA push plate switches etc. Unit can control automatic
door operators where the doors are always locked or where the doors are unlocked
during the business day.
Overview
Specifications
StrikeIt1
(order batteries separately)
Agency Approvals
UL Listed for Access Control System Units
(UL 294).
CUL Listed - CSA Standard C22.2
No.1-98, Audio, Video and Similar
Equipment.
CSFM - California State
Fire Marshal Approved.
MEA - NYC Department of
Buildings Approved.
Input:
• 115VAC 50/60Hz, 1.9 amp.
• Two (2) N/O trigger inputs.
Output:
• Two (2) 24VDC individually controlled lock outputs
rated @ 16 amp for 300ms.
• One (1) 12VDC filtered regulated auxiliary output
rated @ 1.5 amp continuous supply current
(Not affected by FACP trigger).
• One (1) 24VDC filtered regulated auxiliary output
rated @ 1 amp continuous supply current
(Not affected by FACP trigger).
• Two (2) delayed follower form “C” relay outputs
rated @ 1 amp/28VDC. Delay time is selectable
0.5 second or 1 second. Energized duration is 1 second.
• Two (2) follower form “C” relay outputs rated
@ 1 amp/28VDC. Relays energize while input
is closed.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.3 amp.
Visual Indicators:
• Green LED indicates input 115VAC present.
Visual Indicators (cont’d):
• Green LED indicates panic device status
(short, open or triggered).
• Red LED indicates when FACP disconnect
is triggered.
Features:
• Fire Alarm Disconnect:
- Normally Closed FACP trigger input.
- Programmable Fire Alarm Disconnect options:
a)Removes power to outputs and disables delayed
follower relays.
b)Connects power to lock outputs and enables
delayed follower relays.
• LK1 and LK2 adjust the panic device release time for
the lock outputs from 300ms to 30 secs.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr.: 196.5 BTU/Hr.
• System AC input VA requirement: 218.5VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
• Enclosure accommodates up to two (2)
12VDC/7AH batteries.
• Product weight (approx.): 13.7 lbs. (6.21 kg).
• Shipping weight (approx.): 14.6 lbs. (6.62 kg).
Altronix Corp. 140 58th St. Brooklyn, NY