Altronix AL600ULXPD16CB Data Sheet - Manual

Agency Approvals
Specifications
AL600ULXPD16CB is a multi-output power supply/charger that converts a
115VAC, 60Hz input into sixteen (16) 12VDC or 24VDC Class 2 Rated power-
limited outputs.
AL600ULXPD16CB
Multi-Output Power Supply/Charger
Rev. DSAL600ULXPD16CB_06192013
Overview
AL600ULXPD16CB
Input:
• Input 115VAC, 60Hz, 3.5 amp.
Output:
• 12VDC or 24VDC selectable output.
• 6 amp continuous supply current.
• Sixteen (16) Class 2 Rated PTC protected power
limited outputs.
• Outputs are rated @ 2.5 amp.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.7 amp.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• 36.85 or 73.70 BTU/Hr.
• System AC input VA requirement: 218.5VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
15.5” (393.7mm) x 12” (304.8mm) x 4.5” (114.3mm)
- Accommodates two (2) 12VDC/12AH batteries.
• Product weight (approx.): 12.0 lbs. (5.44 kg).
• Shipping weight (approx.): 12.9 lbs. (5.85 kg).
UL 294 UL Listed for Access Control
System Units.
UL 1481 UL Listed Standard for Safety for
Fire Protective Signaling Systems.