Altronix AL175ULX2 Data Sheet - Manual

Overview
Specifications
Agency Approvals
UL 294 UL Listed for Access Control
System Units.
CUL Listed - CSA Standard C22.2
No.205-M1983, Signal Equipment.
MEA - NYC Department of
Buildings Approved.
CSFM - California State Fire
Marshal Approved.
Altronix Corp. 140 58th St. Brooklyn, NY
AL175ULX2
Two (2) Output Switching Power Supply/Charger
Rev. DSAL175ULX2 - 02132013
AL175ULX2 is a Two (2) Output Switching Power Supply/Charger that converts
a 115VAC 60Hz input into two (2) individually PTC protected 12VDC or 24VDC
outputs.
Input:
• Input 115VAC, 60Hz, 0.6 amp.
• Access control trigger input.
Output:
• 12VDC or 24VDC selectable outputs.
• 1.75 amp supply current.
• Two (2) Class 2 Rated power limited outputs.
- Fail-Safe/Fail-Secure lock output (switched).
- Auxiliary power output (unswitched).
• PTC protected outputs, rated @ 2.5 amp.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.4 amp.
Supervision:
• AC fail supervision (form “C” contacts).
• Supervised Fire Alarm Disconnect
(Latching w/reset or Non-Latching).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• 10.75-21.5 BTU/Hr.
• System AC input VA requirement: 69VA.
Mechanical:
• Enclosure Dimensions (H x W x D approx.):
15.5” (393.7mm) x 12” (304.8mm) x 4.5” (114.3mm).
- Accommodates up to two (2) 12VDC/7AH batteries.
• Product weight (approx.): 10.6 lbs. (4.81 kg).
• Shipping weight (approx.): 11.8 lbs. (5.35 kg).
AL175ULX2