Altronix DPS3 Data Sheet - Manual

Input:
• 6VDC or 12VDC output use TP1640 or
24VDC output use T2428100.
Output:
• 6VDC, 12VDC or 24VDC selectable output.
• 2.5 amp continuous supply current.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.3 amp.
• Battery short circuit protection (circuit breaker).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: --- 20º C to 49º C ambient.
• BTU/Hr.:
- 6VDC: 6 BTU/Hr.
- 12VDC: 11 BTU/Hr.
- 24VDC: 23 BTU/Hr.
• System AC input VA requirement:
6VDC/12VDC: 276VA. 24VDC: 402.5VA
Features:
• Extremely compact design.
• Includes battery leads.
• Snap Track compatible
(order Altronix model number ST3).
Mechanical:
• Board Dimensions (L x W x H approx.):
3.5” (88.9mm) x 3” (76.2mm) x 2” (50.8mm)
• Product weight (approx.): 1.0 lbs. (0.45 kg).
• Shipping weight (approx.): 1.3 lbs. (0.59 kg).
DPS3 converts a low voltage AC input into 6VDC, 12VDC or 24VDC @ 2.5
amp continuous supply current. This unit has a wide range of applications for
access control, security and CCTV system accessories that require additional
power.
DPS3
Power Supply/Charger
Rev. DSDPS3_01212013
Overview
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
0.35”
(8.89mm)
0.16”
(4.06mm) Ø
0.156”
(3.96mm)
2.75”
(69.85mm)
2.25”
(57.15mm)
3.0”
(76.2mm)
3.5”
(88.9mm)
Board Dimensions (L x W x H) (approximate) :
3.5” (88.9mm) x 3” (76.2mm) x 2” (50.8mm)
DPS3
ST3 Mechanical Drawing
3.4375”
87.3mm
2.75”
69.85mm
2.6875”
68.26mm
0.875”
22.2mm
0.125”
3.2mm 0.3125” (7.9mm)
3.25”
82.55mm
0.625”
15.9mm