Altronix VB1T Installation Instructions - Manual

VB1 24VDC @ .75 amp 12VDC - 24VDC x -
VB1T 24VDC @ .75 amp 12VDC - 24VDC - x
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IIVB series - Rev. 051905
J12G MEMBER
Specifications:
• Converts a 12VDC-24VDC input into a
regualted 24VDC ouput (Fig. 1).
• Built-in overload protection.
• Electronically filtered and regulated output.
• Power LED.
• High impact insulated housing.
• Compact design allows for integration in a wide
range of camera housings.
Dimensions: 1.625"L x 2.375"W x 1"H
Applications:
• Compensates for voltage drop due to long wire runs.
• Power for 24VDC Access Control devices from
a 12VDC power source.
Installation Instructions:
1. Mount the unit in desired location.
2. a. VB1: Connect Yellow (positive) lead and Purple (negative) lead to 12VDC to 24VDC source! Observe polarity.
b. VB1T : Connect 12VDC to 24VDC power source to terminals marked [IN+] and [IN--].
3. Measure output voltage and check polarity before connecting devices, in order to avoid potential damage.
4. a. VB1: Connect Red lead [Pos. +] and Black lead [Neg. --- ] to 24VDC device to be powered.
b. VB1T : Connect 24VDC device to be powered to terminals marked [+ OUT -- ].
5. LED will illuminate when power is present.
Note: If input voltage exceeds 24VDC output voltage will follow the input.
This may cause damage to powered equipment.
VB Series - Power Boosters
Overview:
The unit converts a 12VDC-24VDC input into a regualted 24VDC ouput.
A
ltr
on
ix
M
od
el
N
um
be
r
O
ut
pu
t
In
pu
t
C
ab
le
A
ss
em
bl
y
Te
rm
in
al
B
lo
ck
Fig. 1