Altronix eBridge1PCRMT Data Sheet - Manual

eBridge1PCRMT - IP and PoE+ over Coax Kit
Rev. DSeBridge1PCRMT_08012013
Specifications
* sloc is a registered trademark of Intersil Corporation.
The eBridge1PCRM and eBridge1PCTX are CAT5 to Coax cable
Ethernet adapters/Media converters that deliver data and power over
the coax cable in a PoE+ compliant format. The paired set enables
fast 10/100Base-T Ethernet digital communication to be transmitted
over Coax cable. An eBridge1PCRM receiver is powered by a PoE
midspan or endspan product, such as a NetWay8M and NetWay16M and
sends its power over the coax to the eBridge1PCTX transmitter under
PoE protocol. This enables the eBridge1PCRM to be used in a man-
aged manner, allowing for remote camera reset. The eBridge1PCTX in
turn delivers that PoE+ compliant power to a PoE enabled camera or
IP device. The eBridge1PCRM will not deliver power to non compliant devices, thus avoiding damage to improperly
connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/devices
utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling.
In addition, data transmission and power over the Coax is possible up to1500 ft. in comparison to 100m (328 ft.)
Ethernet maximum distance. A maximum range from head end to the PoE camera/device is 610m (2000 ft.) taking
into consideration that up to 100m (328 ft.) of structured cable may be deployed at each end.
eBridge1PCRM
and eBridge1PCTX
Overview
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Compliant:
• Incorporates *sloc TM (Security Link over Coax) technology.
Input:
• Powered by midspan or endspan.
Local Aux. Input Power for eBridge1PCRM:
• 24VDC/110mA or 24VAC/200mA.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m (328 ft.).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) Delivered to
camera by eBridge1PCTX. Power provided by
eBridge1PCRM to eBridge1PCTX by PoE protocol.
• Throughput is rated to pass 25mbps of data at
distances up to 1500 ft. With proper headend
equipment this supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 1,500 ft. for power delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge1PCRM:
Blue LED - Coax link connection (sloc).
Green - PoE ON.
Green - Power ON.
LED Indicators (cont’d):
• eBridge1PCRM and eBridge1PCTX:
Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• eBridge1PCTX:
Blue LED - Coax link connection (SLOC).
Green LED - PoE from eBridge1PCRM.
Environmental:
• Operating Temperature:
eBridge1PCRM: -- 4ºF to 120.2ºF (-- 20ºC to +49ºC).
eBridge1PCTX: --- 4ºF to 120.2ºF (-- 20ºC to +49ºC).
• Storage Temperature:
-- 22º to 158ºF (-- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment over 610m (2000 ft.).
• Upgrade deployed CCTV Coax to a digital network
in Retail, Casinos, Airports, Schools, Hospitals, etc.
Mechanical:
• Dimensions (W x L x H approx.):
eBridge1PCRM:
3.5” x 4.375” x 1” (88.89mm x 111.125mm x 25.4mm)
eBridge1PCTX:
2.5” x 4.375” x 1” (63.5mm x 111.125mm x 25.4mm)
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
European Conformity
C-Tick Compliant
Z1409