Altronix NetWay8 Data Sheet - Manual

NetWay8 Midspans provide power and pass data (video) for PoE compliant camer-
as/devices. Eight ports in a space saving 1U EIA 19” rack mount chassis. Cameras/
devices may be located up to 100m (328 ft.) from the NetWay unit. A NetWayXT
repeater module can be utilized to extend the distance an additional 100m (328
ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968
ft.) is possible using multiple repeaters, based on camera/device port requirement.
NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP
cameras by utilizing NetWay1512 or NetWay3012 adapters.
NetWay8 - PoE Midspan Solution
for Standard Network Infrastructure
Rev. DSNetWay8 - 12182012
Overview
Specifications
®
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Input:
• 115VAC 50/60Hz, 2 amp.
• Primary fuse (int ernal) is rated at 5 amp/250V.
Power:
• Unit provides up to 30W max. full power per port.
Total power: 150W.
• IEEE 802.3af and IEEE 802.3at compliant (PoE +).
• Short circuit protection.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/edge devices.
Features:
• Easy plug and play installation.
• Safe and cost effective power distribution
over CAT5/5E/6 LAN infrastructure.
• Automatic detection and protection of legacy
non-PoE cameras.
• Port status LED indicators.
• Illuminated master power disconnect circuit breaker
with manual reset (switch).
• IEC 320 - 3-wire grounded line cord (detachable).
Electrical:
• Operating temperature:
UL60950-1 - 32ºF to 104ºF (0ºC to 40ºC).
• 57 BTU/Hr.
• System AC input VA requirement: 230VA.
Mechanical:
• Unit can be rack, wall or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19” rack.
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x 8.5” (216mm)
• Product weight (approx.): 5.15 lbs. (2.34 kg.).
• Shipping weight (approx.): 7.45 lbs. (2.93 kg.).
Accessories:
NetWay1512:
• 15W adapter for non-PoE compliant IP cameras.
NetWay3012:
• 25W adapter for non-PoE compliant IP
fixed or PTZ cameras.
NetWayXT:
• PoE repeater module extends range 100m (328 ft.).
NetWay8
UL Listed for Access Control Systems
(UL294).