Altronix HubWay LD16Di Data Sheet - Manual

HubWayLD16Di Active UTP Transceiver Hub w/Integral Isolated Camera
Power transmits UTP video, RS422/RS485 data and power over a single CAT-5
or higher structured cable. Unit provides 16 camera channels in a space saving
1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted.
Video transmission range is up to 3000 ft. max. per channel. Units are com-
patible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition,
the unit features individually selectable 24VAC or 28VAC fuse protected out-
puts with surge suppression. An optional HubSat4D Passive UTP Transceiver
Hub with Integral Isolated Camera Power can be used as an accessory module
to transmit video from up to 4 cameras over a single CAT-5 or higher structured
cable back to the HubWayLD16Di. In addition, the HubSat4D provides power
to these cameras locally to eliminate the possibility of voltage drop associated
with long cable runs.
HubWayLD16Di
Active UTP Transceiver Hub with Integral Isolated
Camera Power. Video Balun/Combiners not included.
HubWayLD162Di
Active UTP Transceiver Hub with Integral Isolated
Camera Power with sixteen (16) HubWayAv Video
Balun/Combiners. HubWayLD163Di
Active UTP Transceiver Hub with Integral Isolated
Camera Power with sixteen (16) HubWayDv Video
Balun/Combiners.
HubWay ® LD16Di Active UTP Transceiver Hub
with Integral Isolated Camera Power
Rev. DSHubWayLD16Di - 10312012
Overview
Specifications
Models
Agency Approvals
UL Listed for Commercial CCTV Equipment
(UL 2044). CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.
HubWayLD16Di
Input:
• 115VAC 50/60Hz, 1.5 amp
or 230VAC 50/60Hz, 1 amp.
• Primary fuse (internal) is rated at 5 amp/250V.
Video:
• Sixteen (16) channels of video over twisted pair
up to a distance of 3000 ft. (914.4m) per channel.
• Sixteen (16) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Electronically isolated camera power.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 10 amp (300VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp
per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
• Video signal and power LED indicators.
Features:
• Picture and Gain control.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
- HubWayAv2 - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Mechanical:
• Modular 1U standard EIA 19” rack mount chassis
• Enclosure Dimensions (H x W x D approx.):
1.625” (41.275mm) x 19.125” (486mm)
x
2.498” (63.45mm)
- HubWayLD8Di: 13.5 lbs. (6.12kg)
- HubWayLD82Di: 23.55 lbs. (10.68kg)
- HubWayLD83Di: 24.55 lbs. (11.14kg)