Altronix HubWay 16D Data Sheet - Manual

Altronix HubWay16D Passive UTP Transceiver Hub
w/Integral Camera Power transmits UTP
video, RS422/RS485 data and power over a
single CAT-5 or higher structured cable. Unit
provides 16 camera channels in a space saving
1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted.
Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ
cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the
unit features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional
HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit
video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay16D. In addition, the
HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with
long cable runs.
Input:
• 115VAC 50/60Hz, 3 amp
or 230VAC 50/60Hz, 1.5 amp.
Video:
• Sixteen (16) channels of video over twisted pair
up to a distance of 750 ft. per channel.
• Sixteen (16) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 10 amp (300VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC protected outputs are rated @ 1 amp
per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
• Sixteen (16) individual power LED indicators.
Features:
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Shipping Weight (approximate):
- HubWay16D: 19.75 lbs.
- HubWay162D: 21.15 lbs.
- HubWay163D: 22.15 lbs.
HubWay16D
Sixteen (16) Channel Passive UTP Transceiver
Hub with Integral Camera Power
HubWay162D
Sixteen (16) Channel Passive UTP Transceiver with
sixteen (16) HubWayAv Video Balun/Combiners
HubWay163D
Sixteen (16) Channel Passive UTP Transceiver with
sixteen (16) HubWayDv Video Balun/Combiners
HubWay ® 16D Passive UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWay16D - E19I
Overview
Specifications
Models
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals