Altronix eBridge1PCRX Data Sheet - Manual

The eBridge1PCRX is CAT5 to Coax cable Ethernet Receiver that deliver data and
power over the coax cable in a PoE compliant format. It sends power over the coax
to the eBridge transceiver under PoE protocol. The eBridge1PCRX will not deliver
power to non-compliant devices, thus avoiding damage to improperly connected
non-PoE cameras. This plug and play unit facilitates system upgrades from analog
to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and
labor associated with installing new network cabling. In addition, data transmission
and power over the Coax is possible up to 1500 ft. in comparison to 100m (328 ft.)
Ethernet maximum distance. A maximum range from head end to the PoE camera/
device is 610m (2000 ft.), taking into consideration that up to 100m (328 ft.) of struc-
tured cable may be deployed at each end.
eBridge1PCRX - IP over Coax Receiver
Rev. DSeBridge1PCRX_08012013
Overview
eBridge1PCRX
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
C-Tick Approved - Z1409
Specifications
* sloc is a registered trademark of Intersil Corporation.
Agency Listings:
• UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
• C-Tick compliant.
Compliant:
• Incorporates sloc
TM
* (Security Link over Coax) technology.
Input:
• 24VDC to 56VDC Class 2 power supply
(polarity observed).
Power Consumption (under maximum load):
• 24VDC/1,500mA, 56VDC/900mA.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 or better structured cable.
• Distance: up to 100m (328 ft.).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and PoE+
compliant to IEEE 802.3at (30W) Delivered to
camera by eBridge1PCTX. Power provided by
eBridge1PCRX to eBridge1PCTX by PoE protocol.
• Throughput is rated to pass 25mbps of data at
distances up to 1500 ft. With proper headend
equipment, this supports Megapixel, HD720, HD1080.
Coax:
• Distance: up to 1,500 ft. for power delivery of coax.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• eBridge1PCRX:
Blue LED - Coax link connection (sloc).
Green - PoE ON.
Green - Power ON.
LED Indicators (cont’d):
Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
Environmental:
• Operating Temperature:
15W: -- 4ºF to 113ºF (-- 20ºC to +45ºC).
30W for 24VDC: -- 4ºF to 98.6ºF (-- 20ºC to +37ºC).
30W for 48VDC: -- 4ºF to 113ºF (-- 20ºC to +45ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing.
Electrical:
• BTU/Hr.:
- 24VDC: 18.4 BTU/Hr.
- 56VDC: 25.8 BTU/Hr.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras (see note, pg. 2).
• Extend Network link distance in an industrial
environment over 610m (2000 ft.) (see note, pg. 2).
• Upgrade deployed CCTV Coax to a digital network
in Retail, Casinos, Airports, Schools, Hospitals, etc.
Mechanical:
• Dimensions (W x L x H approx.):
3.5” x 4.375” x 1” (88.89mm x 111.125mm x 25.4mm)
• Product Weight: 0.318 Lbs (0.019 kg).
• Shipping Weight: 0.485 Lbs (0.03 kg).