Altronix TP2450 Installation Instructions User Manual
Plug-in transformers
Specification Chart:
Installation Instructions:
1. Connect wires to plug-in transformer.
2. Measure output voltage before connecting devices. This helps avoid potential damage.
3. Plug in the transformer to an outlet and secure transformer with screw provided.
WARNING: This installation should be made by qualified service personnel and should conform to
all local codes and in accordance with the National Electrical Codes.
Plug-in Transformer Diagram
Plug-In Transformers
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Made in U.S.A.
IIPlug-In - Rev. 092602
C29K
MEMBER
Model #
Output
Amp
UL Listed
Dimensions (Fig. 1)
A
B
C
D
TP1220
12VAC/20VA
1.7
x
1.8840”
2.5000”
3.0000”
3.3500”
TP1620
16.5VAC/20VA
1.2
x
1.8840”
2.5000”
3.0000”
3.3500”
TP1640
16.5VAC/40VA
2.4
x
2.3530”
2.6580”
3.1860”
3.5620”
TP1650
16.5VAC/50VA
3.0
x
2.3530”
2.6580”
3.1860”
3.5620”
TP2420
24VAC/20VA
0.8
x
1.8840”
2.5000”
3.0000”
3.3500”
TP2440
24VAC/40VA
1.67
x
2.3530”
2.6580”
3.1860”
3.5620”
TP2450
24VAC/50VA
2.0
x
2.3530”
2.6580”
3.1860”
3.5620”
A
B
C
D
Fig. 1