Altronix HubWay LD8DS Data Sheet - Manual

Altronix new HubWayLD8DS Active
UTP Transceiver Hub w/Integral
Camera Power transmits UTP video,
RS422/RS485 data and power over a
single CAT-5 or higher structured
cable. Unit provides 8 camera channels in a space
saving 1U EIA 19” rack mount chassis which may be wall or
shelf mounted. Video transmission range is up to 3000 ft. max. per channel. Units are compatible with AC and/or
DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi Video Balun/Combiners.
An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory
module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the
HubWayLD8DS. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of
voltage drop associated with long cable runs.
Input:
• 115VAC 60Hz, 1.5 amp
or 230VAC 50/60Hz, 1 amp.
• Primary fuse is rated at 5 amp/250V.
Video:
• Eight (8) channels of video over twisted pair
up to 3000 ft.
• Eight (8) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individual field selectable 24VAC or 28VAC outputs.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
• Class 2 Rated power limited outputs.
• PTC’s are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• AC input power indicator.
• Eight (8) individual video LED indicators.
Features:
• Picture and Gain control.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U EIA 19” rack mount chassis.
Optional Accessories:
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Shipping Weight (approximate):
- HubWayLD8DS: 13 lbs.
- HubWayLD82DS: 14.2 lbs.
- HubWayLD83DS: 13.7 lbs
HubWay ® LD8DS Active UTP Transceiver Hub
with Integral Camera Power
Rev. DSHubWayLD8DS - E20I
Overview
Specifications
HubWayLD8DS
Active UTP Transceiver Hub with Integral Camera
Power. Video Balun/Combiners not included.
HubWayLD82DS
Active UTP Transceiver Hub with Integral Camera
Power with eight (8) HubWayAv Video
Balun/Combiners.
HubWayLD83DS
Active UTP Transceiver Hub with Integral Camera
Power with eight (8) HubWayDv Video
Balun/Combiners.
Models
UL Listed for Commercial CCTV Equipment (UL 2044).
Agency Approvals