Altronix AL300ULXB2 Data Sheet - Manual

Specifications
Input:
• Input 115VAC 60Hz, 3.5 amp.
• Input fuse rated @ 3.5 amp/250V.
Output:
• 12VDC or 24VDC selectable output.
Burglar Alarm Applications (UL 603):
12VDC = 10VDC-13.2VDC.
24VDC = 20VDC-26.4VDC.
• 2.5 amp total supply current.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.7 amp.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
Visual Indicators:
• AC input, DC output and Battery LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• BTU/Hr. :
12VDC: 14.71 - 16.63 BTU/Hr.
24VDC: 29.43 - 32.41 BTU/Hr.
• System AC input VA requirement: 402.5VA.
Mechanical:
• Board Dimensions (W x L x H, approx.):
4.5” (114.3mm x 7.1” (180.34mm) x 1.44”(36.58mm)
• Product weight (approx.): 1.4 lbs. (0.64 kg).
• Shipping weight (approx.): 1.6 lbs. (0.73 kg).
AL300ULXB2 is a power supply/charger that converts a 115VAC 50/60Hz
input into a Class 2 Rated power limited 12VDC or 24VDC output
AL300ULXB2
Power Supply/Charger
Rev. DSAL300ULXB2_12142012
Overview
AL300ULXB2
Agency Approvals
7.1"
(180.34mm)
4.5"
(114.3mm)
6.7"
(170.18mm)
3.7"
(93.98mm)
0.34"
(8.64mm)
0.182"
(4.62mm)
o0.156"
(3.96mm)
UL Recognized component for Access Control System Units (UL 294),
Standard for Power Supplies for Use with Burglar-Alarm Systems (UL 603),
Hospital Signaling and Nurse Call Equipment (UL 1069),
Standard for Safety for Fire Protective Signaling Systems (UL 1481).
Board Dimensions (L x W x H) (approximate) :
4.5” (114.3mm) x 7.1” (180.34mm) x 1.44” (36.57mm)