Altronix T24130D Installation Instructions User Manual
Open frame transformers
Open Frame Transformers
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Made in U.S.A.
IIT24130D/T2885D - Rev. 031008
C10H
MEMBER
Specification Chart:
Installation Instructions:
1. Mount transformer in desired location/enclosure.
2. Connect 115VAC or 220VAC power to the primary wires as shown in the Input Wiring Configuration
below (Fig. 1a or 1b).
3. Measure output voltage across the secondary wires from terminal numbers 6 and 10, as shown in the Output Wiring
Configuration below (Fig. 2), before connecting devices. This helps avoid potential damage.
4. Connect 24VAC (T24130D) or 28VAC (T2885D) devices to be powered to the secondary wires from terminal
numbers 6 and 10, as shown in the Output Wiring Configuration below (Fig. 2).
WARNING: This installation should be made by qualified service personnel and should
conform to all local codes and in accordance with the National Electrical Codes.
Input Wiring Configuration:
Transformer Dimensions:
Fig. 3
10
6
PRIMARY TERMINALS
SECONDARY TERMINALS
F
5 4
2 1
A
B
D
C
E
Fig. 1a
Fig. 1b
Output Wiring Configuration:
Fig. 2
5
4
3
2
1
5
4
3
2
1
220VAC Input
115VAC Input
24VAC or 28VAC Output
10
9
8
7
6
Model #
Input
Output
T24130D
115VAC 50/60Hz .9 amp or 220VAC 50/60Hz .45 amp
24VAC/100VA (4.16 amp)
T2885D
115VAC 50/60Hz .9 amp or 220VAC 50/60Hz .45 amp
28VAC/100VA (3.57 amp)
Model #
A
B
C
D
E
F
Approx. Ship Wt.
T24130D
3.06”
2.56”
2.25”
1.31”
4”
3.625”
1.12 lbs.
T2885D
3.57”
2.56”
2.25”
1.31”
4”
3.625”
1.12 lbs.