Altronix eBridge4CR Data Sheet - Manual

The eBridge4CR is a CAT5 to Coax cable Ethernet receiver. The receiver enables
fast 10/100Base-T Ethernet digital communication to be received over Coax
cable. This plug and play unit facilitates system upgrades from analog to IP cam-
eras/devices utilizing existing legacy Coax and eliminating the costs and labor
associated with installing new network cabling. In addition data transmission over
the Coax can be extended to 1500’ (five times the 100m/328ft Ethernet maximum
length), eliminating the need for repeaters. At the same time the unit can combine
Composite Video Signal with the Ethernet data enabling connection to an analog
input on a monitor or matrix switch. The eBridge4CR is to be used with a compatible Sony Hybrid cameras with
“sloc” technology. An eBridge1CT is required for other IP cameras/devices.
Compliant:
• Incorporates *sloc TM (Security Link over Coax)
technology.
Input:
• 24VDC to 56VDC UL Listed Class 2 power supply
(polarity not observed) or UL Listed 24VAC Class 2
plug-in transformer.
Power Consumption:
• 24VDC/440mA, 56VDC/220mA,
24VAC/800mA.
Ethernet:
• Four (4) ports.
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or better structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• Throughput is rated to pass 25mbps of data at
distances up to 1500 ft. With proper headend
equipment, multiple Megapixel cameras can be used.
Coax:
• Four (4) ports.
• Distance: up to 1,500 ft.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Blue LED - Coax link connection.
• Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• Green LED - Power.
Environmental:
• Operating Temperature: 14ºF to 122ºF
(--- 10ºC to +50ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing.
Electrical:
• BTU/Hr.:
- 24VDC: 5.40 BTU/Hr.
- 56VDC: 6.31 BTU/Hr.
- 24VAC: 9.83 BTU/Hr.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enables simultaneous transmission of composite and
digital IP video.
Mechanical:
• Dimensions (H x W x D approx.):
1.625” x 5.25” x 8.5” (42mm x 133.35mm x 216mm)
• Product weight (approx.): 2.9 lbs. (1.32 kg).
• Shipping weight (approx.): 3.9 lbs. (1.77 kg).
eBridge4CR - IP over Coax
Rev. DSeBridge4CR_08012013
Specifications
Agency Approvals
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
Overview
European Conformity
eBridge4CR
* sloc is a registered trademark of Intersil Corporation.
C-Tick Approved - Z1409