Altronix AL1024ULXB Data Sheet - Manual

Board Dimensions (L x W x H) (approximate) :
5.2” (132.08mm) x 7.6” (193.04mm) x 2.5” (63.5mm)
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
0.25”
(6.35mm)
6.7”
(170.18mm)
3.7”
(93.98mm)
5.1”
(129.54mm)
7.6”
(193.04mm)
0.12”
(3.05mm)
Ø 0.156”
(3.96mm)
UL Recognized component for Access Control System Units (UL 294)
Standard for Safety for Fire Protective Signaling Systems (UL 1481).
Agency Approvals
Specifications
Input:
• Input 115VAC, 60Hz, 4.4 amp.
• Input fuse rated @ 3.5 amp/250V.
Output:
• 24VDC output.
• 10 amp of continuous supply current for
Access Control applications.
• 8 amp of continuous supply current for
Fire Alarm applications.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
Battery Backup (cont’d):
• Maximum charge current 3.6 amp.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
Visual Indicators:
• AC input and DC output LED indicators.
Electrical:
• Operating temperature: 0º C to 49º C ambient.
• 122.84 BTU/Hr.
• System AC input VA requirement: 506VA.
Mechanical:
• Product weight (approx.): 2.45 lbs. (1.11 kg).
• Shipping weight (approx.): 2.75 lbs. (1.25 kg).
AL1024ULXB is a UL Recognized power supply/charger that converts a 115VAC,
60Hz input into a single 24VDC non-power limited output.
AL1024ULXB
Off-line Switching Power Supply/Charger
Rev. DSAL1024ULXB_11142012
Overview
AL1024ULXB