C&H Technology ST280CHPbF Series - Manual (Page 4)

Document Number: 94401 For technical questions, contact: [email protected] www.vishay.com
Revision: 05-May-08 3
ST280CHPbF Series
Phase Control Thyristors
(Hockey PUK Version), 500 A
Vishay High Power Products
Note
• The table above shows the increment of thermal resistance R
thJ-hs
when devices operate at different conduction angles than DC
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS
VALUES
UNITS
TYP. MAX.
Maximum peak gate power P
GM
T
J
= T
J
maximum, t
p
≤ 5 ms 10.0
W
Maximum average gate power P
G(AV)
T
J
= T
J
maximum, f = 50 Hz, d% = 50 2.0
Maximum peak positive gate current I
GM
T
J
= T
J
maximum, t
p
≤ 5 ms
3.0 A
Maximum peak positive gate voltage + V
GM
T
J
= T
J
maximum, t
p
≤ 5 ms
20
V
Maximum peak negative gate voltage - V
GM
5.0
DC gate current required to trigger I
GT
T
J
= - 40 °C
Maximum required gate trigger/
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
180 -
mA T
J
= 25 °C 90 150
T
J
= 150 °C 30 -
DC gate voltage required to trigger V
GT
T
J
= - 40 °C 2.9 -
V T
J
= 25 °C 1.8 3.0
T
J
= 150 °C 1.0 -
DC gate current not to trigger I
GD
T
J
= T
J
maximum
Maximum gate current/voltage
not to trigger is the maximum
value which will not trigger any
unit with rated V
DRM
anode to
cathode applied
10 mA
DC gate voltage not to trigger V
GD
0.30 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating junction and
storage temperature range
T
J
, T
Stg
- 40 to 150 °C
Maximum thermal resistance,
junction to heatsink
R
thJ-hs
DC operation single side cooled 0.17
K/W
DC operation double side cooled 0.08
Maximum thermal resistance,
case to heatsink
R
thC-hs
DC operation single side cooled 0.033
DC operation double side cooled 0.017
Mounting force, ± 10 %
4900
(500)
N
(kg)
Approximate weight 50 g
Case style See dimensions - link at the end of datasheet TO-200AB (A-PUK)
ΔR
thJ-hs
CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION
TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.016 0.017 0.011 0.011
T
J
= T
J
maximum K/W
120° 0.019 0.019 0.019 0.019
90° 0.024 0.024 0.026 0.026
60° 0.035 0.035 0.036 0.037
30° 0.060 0.060 0.060 0.061