C&H Technology CS241020 - Manual (Page 3)

D-18
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
CS241020
Fast Recovery Single Diode Module
200 Amperes/1000 Volts
Absolute Maximum Ratings
Characteristics Symbol CS241020 Units
Peak Reverse Blocking Voltage VRRM 1000 Volts
Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms VRSM 1100 Volts
DC Reverse Blocking Voltage VR(DC) 800 Volts
DC Current, TC = 75°C IFM 200 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) IF(DC) 2000 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) IFSM 1825 Amperes
I2t (for Fusing), 8.3 milliseconds I2t 16500 A2sec
Storage Temperature TSTG -40 to 125 °C
Operating Temperature Tj -40 to 150 °C
Maximum Mounting Torque M5 Mounting Screw — 17 in.-lb.
Maximum Mounting Torque M4 Terminal Screw — 12 in.-lb.
Module Weight (Typical) — 90 Grams
V Isolation VRMS 2500 Volts
Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified
Characteristics Symbol Test Conditions CS241020 Units
Blocking State Maximums
Forward Leakage Current, Peak IRRM Tj = 150°C, VDRM = Rated 40 mA
Conducting State Maximums
Peak On-State Voltage VFM IFM = 200A 1.5 Volts
Switching Maximums
Reverse Recovery Time trr IFM = 200A, Tj = 150°C 0.8 ␮ s
di/dt =-400A/ ␮ s, VR = 600V
Reverse Recovery Charge Qrr IFM = 200A, Tj = 150°C 80 ␮ C
di/dt =-400A/ ␮ s, VR = 600V
Thermal Maximums
Thermal Resistance, Junction-to-Case R ␪ (J-C)
Per Module 0.25 °C/Watt
Thermal Resistance, Case-to-Sink (Lubricated) R ␪ (C-S)
Per Module 0.15 °C/Watt
INSTANTANEOUS ON-STATE CURRENT, I FM ,
(AMPERES)
MAXIMUM
ON-STATE CHARACTERISTICS
10 1 10 2 10 3
INSTANTANEOUS ON-STATE VOLTAGE, V
FM
, (VOLTS)
0.4
0.8
1.2
1.6
2.0
2.4
T j = 25 o C
TIME, t, (SECONDS)
TRANSIENT THERMAL IMPEDANCE
CHARACTERISTICS (JUNCTION-TO-CASE)
TRANSIENT THERMAL IMPEDANCE, Z
␪ (J-C)
(t), (
o
C/WATT)
10 0 10 1
10 -3 10 -2 10 -1 10 0
0
0.08
0.16
0.24
0.32