C&H Technology ME700803 - Manual (Page 3)

D-62
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
ME700803
Three-Phase Diode Bridge Modules
30 Amperes/800 Volts
Absolute Maximum Ratings
Characteristics Symbol ME700803 Units
Peak Reverse Blocking Voltage VRRM 800 Volts
Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms VRSM 900 Volts
DC Reverse Blocking Voltage VR(DC) 640 Volts
DC Output Current, TC = 103°C IO 30 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) IFSM 400 Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) IFSM 365 Amperes
I2t (for Fusing), 8.3 milliseconds I2t 667 A2sec
Storage Temperature TSTG -40 to 125 °C
Operating Temperature Tj -40 to 150 °C
Maximum Mounting Torque M6 Mounting Screw — 26 in.-lb.
Module Weight (Typical) — 120 Grams
V Isolation VRMS 2000 Volts
Electrical and Thermal Characteristics, Tj = 25°C unless otherwise specified
Characteristics Symbol Test Conditions ME700803 Units
Blocking State Maximums
Reverse Leakage Current, Peak IRRM Tj = 150°C, VRRM = Rated 1.5 mA
Conducting State Maximums
Peak On-State Voltage VFM IFM = 30A 1.1 Volts
Thermal Maximums
Thermal Resistance, Junction-to-Case R ␪ (J-C)
Per Module 0.7 °C/Watt
Thermal Resistance, Case-to-Sink (Lubricated) R ␪ (C-S)
Per Module 0.1 °C/Watt
INSTANTANEOUS ON-STATE CURRENT, I FM ,
(AMPERES)
MAXIMUM
ON-STATE CHARACTERISTICS
0.7
10 0
0.8
0.9
1.0
1.1
1.2
10 1 10 2
INSTANTANEOUS ON-STATE VOLTAGE, V
TM
, (VOLTS)
T j = 25 o C
MAXIMUM
ON-STATE POWER DISSIPATION
DC OUTPUT CURRENT, I O , (AMPERES)
MAXIMUM POWER DISSIPATION, P
AV(MAX)
, (WATTS)
0 10 20 30 40 50
0
20
40
60
80
100
60
MAXIMUM
ALLOWABLE CASE TEMPERATURE
DC OUTPUT CURRENT, I O , (AMPERES)
MAXIMUM ALLOWABLE CASE TEMPERATURE, T
C
, (
o
C)
120
140
160
100
80
0 10 20 30 40 50