C&H Technology 123 SAL-A - Manual (Page 12)

Document Number: 28355 For technical questions, contact: [email protected] www.vishay.com
Revision: 23-Jun-08 261
123 SAL-A
Aluminum Capacitors
Solid Axial
Vishay BCcomponents
ADDITIONAL TESTS AND REQUIREMENTS FOR EPOXY-FILLED VERSIONS SAL-AG
2281 123 8.... Form BA ± 10 %, level S, lead (Pb)-free
2222 123 8.... Form BA ± 10 %, level S, non lead (Pb)-free
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE REQUIREMENTS
Severe vibration tests in accordance with “IEC 60068-2-6” and “MIL STD-202”, method 204, letter E, with the following details and
additions
Method of mounting: clamping both body and leads
ΔC/C: ± 10 %
tan δ ≤ 1.2 x stated limit
Z
≤ 1.4 x stated limit
DC leakage current: ≤ stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
severity 1 frequency range temperature 10 to 3000 Hz; 20 to 25 °C
severity 2 frequency range temperature 50 to 2000 Hz; 125 °C
severity 1 and 2 vibration amplitude: 50 g or 3.5 mm, whichever is less
Direction and duration of motion:
severity 1 1 octave/minute; 3 directions (mutually perpendicular);
20 sweeps per direction (total 60 sweeps or 18 hours)
severity 2 1 octave/minute; 2 directions (longitudinal and
transversal); 3 sweeps per direction
(total 6 sweeps or 1 hour)
Functioning:
severity 1 rated voltage applied
severity 2 no voltage applied
Typical capability > 80 g at 10 to 3000 Hz (also at 125 °C)
Severe shock tests in accordance with “IEC 60068-2-27” and “MIL STD-202”, method 213, letter F, with the following details and
additions:
Method of mounting clamping both body and leads ΔC/C: ± 10 %
tan
δ ≤ 1.2 x stated limit
Z ≤ 1.4 x stated limit
DC leakage current:
≤ stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
Pulse shape: half-sine or sawtooth
severity 1 1500 g; 0.5 ms (“MIL STD-202”, method 213, letter F)
severity 2 3000 g; 0.2 ms
severity 3 10 000 g; 0.1 ms
Direction and number of shocks:
severity 1 and 2 3 successive shocks in each direction of 3 mutually
perpendicular axes (total 18 shocks)
severity 3 1 shock in any direction
Functioning rated voltage applied