C&H Technology 10ETS..FPPbF High Voltage Series - Manual (Page 2)

Document Number: 94335 For technical questions, contact: [email protected] www.vishay.com
Revision: 23-Apr-08 1
Input Rectifier Diode
TO-220 FULL-PAK, 10 A
10ETS..FPPbF High Voltage Series
Vishay High Power Products
DESCRIPTION
The 10ETS12FPPbF rectifier series has been
optimized for very low forward voltage drop, with
moderate leakage. The glass passivation
technology used has reliable operation up to
150 °C junction temperature.
Typical applications are in input rectification and these
products are designed to be used with Vishay HPP switches
and output rectifiers which are available in identical package
outlines.
Fully isolated package (V
INS
= 2500 V
RMS
) is UL E78996
approved
This product has been designed and qualified for industrial
level and lead (Pb)-free (“PbF” suffix).
PRODUCT SUMMARY
V
F
at 10 A < 1.1 V
I
FSM
200 A
V
RRM
800/1200 V
Anode
1 3
Cathode TO-220AC FULL-PAK
Base
cathode
Available
RoHS*
COMPLIANT
OUTPUT CURRENT IN TYPICAL APPLICATIONS
APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE UNITS
Capacitive input filter T
A
= 55 °C, T
J
= 125 °C
common heatsink of 1 °C/W
12.0 16.0 A
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
F(AV)
Sinusoidal waveform 10 A
V
RRM
Range 800/1200 V
I
FSM
200 A
V
F
10 A, T
J
= 25 °C 1.1 V
T
J
- 40 to 150 °C
VOLTAGE RATINGS
PART NUMBER
V
RRM
, MAXIMUM
PEAK REVERSE VOLTAGE
V
V
RSM
, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
I
RRM
AT 150 °C
mA
10ETS08FPPbF 800 900
0.5
10ETS12FPPbF 1200 1300
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current I
F(AV)
T
C
= 105 °C, 180° conduction half sine wave 10
A Maximum peak one cycle
non-repetitive surge current
I
FSM
10 ms sine pulse, rated V
RRM
applied 170
10 ms sine pulse, no voltage reapplied 200
Maximum I 2 t for fusing I 2 t
10 ms sine pulse, rated V
RRM
applied 130
A 2 s
10 ms sine pulse, no voltage reapplied 145
Maximum I 2 √t for fusing
I 2 √t
t = 0.1 to 10 ms, no voltage reapplied 1450 A 2 √s
* Pb containing terminations are not RoHS compliant, exemptions may apply