Atdec Visidec VFS-Q Technical specs - Manual

General Features
VFS-Q
Overall Dimensions
Technical Specifications
Freestanding
l
Quad
Display Compatibility:
Visidec Freestanding Quad is compatible with Flat Panel Displays measuring
up to 635mm (25”) wide and 450mm (71.72”) high, with either
75mm x 75mm or 100mm x 100mm VESA mounting hole patterns.
Display Weight Compatibility:
Each Quickshift Donut supports a maximum weight of 12kg (26.5lbs)
Cable Management:
Cable Slot, Cable Clips and Cable Balls (included in package)
Colour Options:
- Pole available in Matt Silver Anodised only.
- Quickshift Donut available in Black only.
- Base available in Black/Silver only.
Warranty:
10 years limited
Vertical height adjustment
Horizontal adjustment
360°Portrait/Landscape adjustment
±20° Pan/Tilt adjustment
1
3
2
4
305mm
(12”)
302mm
(12”)
422mm
(16.61”)
222mm
(8.75”)
Choose the correct Mounting
Screws supplied in the
Hardware box and attach the
display as shown.
C
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 02.02.12
Base Dimensions VESA Display Mounting Options
1
2
3
4
682mm (27”)
Max Height
737mm (29”)
305mm
(12”)
764mm
(30”)
89mm (3.5”)
42mm (1.65”)
23mm (0.91”)
Note: This product supports a
maximum width (from edge to edge)
of up to 635mm (25”) per display.
Note: This product supports a
maximum height (from edge to edge)
of up to 450 (17.72”) per display.
75mm
100mm
75mm
100mm