Atdec Spacedec SD-FS-H Technical specs - Manual

1
2
3
4
Technical Specification SD-FS-H
General Features
Display Compatibility:
This product supports up to 6 Flat Panel Displays with a physical
dimensions of up to 635mm (25”) wide and 450mm (71.72”)
high and VESA mounting hole configurations of 75mm x 75mm
or 100mm x 100mm.
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 24.08.11 C
Dimension
Spacedec Freestanding Hex
12
Display Weight Compatibility:
Each Mounting Head supports a maximum weight of 8kg (17 / lbs)
Cable Management:
Cable Slot and Cable Clips (included in package)
Colour:
Colour is: Charcoal Grey
Warranty:
10 years limited
Vertical height adjustment
Horizontal adjustment
360°Portrait/Landscape adjustment
±20° Pan/Tilt adjustment
1
3
4
2
1418mm
(55.81”)
892mm
(35.12”)
340mm
(13.39”) 8mm
(.31”)
915mm
(36.01”)
370mm
(14.57”)
170mm
(6.68”)
51mm
(2.00”)
287mm
(11.30”)
Note: This product supports
displays with a total maximum
height (from edge to edge) of
up to 450 (17.72”).
Note: This product supports
displays with a total maximum
width (from edge to edge) of
up to 635mm (25”).
75mm
100mm
75mm 100mm
VESA MOUNTING OPTIONS
Mounting Options:
A. Freestanding
B. Freestanding with optional bolt down
C. Bolt Through
Bolt Through Freestanding (with optional bolt down)
63mm (2.48”)
Desk Max.
Thickness
55mm (2.17”)
Desk Max.
Thickness
MOUNTING OPTIONS:
Spacedec