Atdec Visidec VF-AT-AA Technical specs User Manual
Technical specification, Focus accessory arm, Vf-at-aa
Focus Accessory Arm
Visidec Focus
Articulated Arm
w/ Display
(for reference only)
1
2
3
4
5
150mm (5.91”)
195mm (7.68”)
68mm (2.68”)
413mm (16.25”)
Technical Specification
VF-AT-AA
General Features
Maximum Load:
8kg (17.5 lbs)
Mounting Compatibility:
The product is designed to be installed
on an existing Visidec Focus pole mount.
VESA Mounting Hole Configurations:
75mm x 75mm
100mm x 100mm
Dual-screen setup supports displays with a
maximum unit width of 650mm (25.59").
Tools Required:
Phillips Head screwdriver
Cable Management:
Cable management system includes
cable slots and Cable Covers.
Colour:
Polished Silver
1
2
3
4
5
360 rotation along mounting pole
Height adjustment
360 articulation of arm
180 pan adjustment
70 tilt adjustment range
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 08.04.11 ©
75mm x 75mm
VESA Hole Pattern
100mm x 100mm
VESA Hole Pattern
Pull out
tabs
The Flexistar™ Mechanism
Dimensions
Warranty:
10 years limited